Before starting a drywall installation, you should know where you’re going to hang your drywall. This will help you determine where you should nail each panel. Next, line up the studs that you want to use in the wall. A carpenter’s pencil is helpful here, and you should mark them with a pencil. If you don’t know where to place studs, you can always mark them with chalk.

To begin, measure the width of your walls and cut your sheet a quarter-inch shorter. Once you have your drywall sheet, use a drywall lift to position it snug against the ceiling. Once the joist is level, use a drywall square to score the lines and install the panels. Once the studs are level, attach the top plate to the joist with the screws. If you’re installing drywall on the ceiling, be sure to follow the manufacturer’s instructions.

A drywall installation crew should always begin with a level surface. Then, they should tape the seams. These seams should be neatly taped, ensuring that no evidence of the transition between panels remains. If the drywall installer is unfamiliar with the location, he/she can show you a sample wall that will give you a better idea of what to expect from the process. And if you’re not a handyman, you should always hire someone who can do the job right.